I recently installed a new HP DL160 Gen 10 server and set it up with ESXI 6.7
I am having an issue where only one VM per NIC (there are 2 NICs on the Server) is able to connect to the network. which ever VM boots first is the one that is able to reach out to the network.
We are connected to a cisco switch which is set as listed below. I have attempted leaving the virtual switch as unassigned, tagging to vlan 21 and tagging as a trunk 4095. the issue still remains the same. both NICs are Ethernet Connection X722 for 1GbE
Name: Gi0/27
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 21 (Servers)
Trunking Native Mode VLAN: 21 (Servers)
Administrative Native VLAN tagging: enabled
Voice VLAN: 51 (Corp-Voice)
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL